Cladding machine is a kind of machine which has been widely used instead of the traditional paint technology in the past. However, as every kind of machine, it also has its service life, and some people do not pay attention to maintenance And maintenance may be damaged quickly, can not run, and a good maintenance habits will bring you unexpected results, may greatly extend the coverage of the machine's life. Therefore, the maintenance and maintenance of the coating machine is very important. So we usually want to do it on the maintenance and care what to do, then let Xiaobian one by one for everyone to introduce:

1, Cladding machine work should be kept clean place, in order to avoid some dust fall into the glue within the system, a direct result of the decline in the quality of glue.

2, the cover machine where the reducer lubricating oil after the first use of a month, should be given a new lubricant replacement, after every six months to conduct a replacement, in the heavy workload of the stage, every Change in three months. In the hot summer temperatures should replace the viscosity of the reducer lubricating oil. When the winter temperature is relatively low, you should change the viscosity of the reducer lubricating oil. The parts of the chain to add butter once a month.

3, the work is completed, the total power must be turned off.

4, coating machine repair or adjustment of parts, it should be handled by the relevant professionals.